Straight-Through Processing (STP)
Straight-through processing (STP) in accounts payable is the share of invoices processed from receipt to approval or posting with no human intervention, because they are captured, matched and coded automatically.
Last updated
Quick answer
What is straight-through processing in accounts payable?
Straight-through processing (STP) in accounts payable means an invoice moves from receipt to approval or posting with no manual work, because capture, PO matching and coding all happen automatically. The STP rate is the share of invoices handled this way; Ardent Partners puts the 2025 average at 35.4% and best-in-class teams at 51.0%.
Formula
STP rate = Invoices processed with no manual touch ÷ Total invoices processed × 100
Example: 1,000 invoices in a month, 420 of them with no manual touch: STP rate = 420 ÷ 1,000 × 100 = 42%.
Straight-through processing measures the share of invoices that need no human intervention. Ardent Partners' State of ePayables 2025 puts the average at 35.4%, with best-in-class AP teams at 51.0% and all others at 29.0%; Ardent's 2026 figures put the average at 38.3%.
Key Industry Data
- 35.4% of invoices processed straight-through on average; 51.0% at best-in-class AP teams vs 29.0% at all others: Ardent Partners, State of ePayables 2025 (2025)
- Only 38.3% of invoices flow straight through untouched; 19.9% require manual exception handling: Ardent Partners, AP Metrics That Matter 2026 preview (2026)
Definition
The STP rate is the number of invoices processed without any manual touch divided by the total processed. It is one of the clearest measures of AP efficiency, because every invoice that needs a person adds cost and time. Exceptions, such as invoices without a PO, price differences or missing receipts, are the main thing that lowers it. STP describes the processing of the invoice, not the payment: an invoice can go straight through to approval and still be paid in a scheduled payment run.
What counts as a manual touch
Define the touch before you measure. A touch is any action a person takes to move the invoice forward: keying or correcting a captured field, finding the right purchase order, choosing a GL account the system did not suggest, chasing a missing receipt, or overriding a matching exception.
Approval is usually not counted as a touch. An approver confirming that spend is genuine is a control you want to keep, so most teams measure STP up to the point the invoice reaches its approver, or up to posting when invoices under a set amount need no approval. Whatever you choose, write it down and use the same definition every month, or the trend means nothing.
STP versus touchless processing
In accounts payable the two terms are used interchangeably. Both describe invoices that move through capture, matching and coding with no human work. Some teams use touchless for a single invoice and STP rate for the percentage across all invoices. The term comes from securities trading, where it means a trade that settles with no manual intervention.
What drives the rate
Four things decide whether an invoice can go straight through. Capture has to read the header and the line items correctly. The invoice has to reference a purchase order that exists and is open. Prices and quantities have to agree with the PO, and with the goods receipt for three-way matching, within your tolerances. And the coding has to be known, either from the PO or from a vendor default.
Fix any one of these and the rate moves. That is why STP is most useful broken down by the reason invoices fell out, rather than as a single number.
| Group | Invoices processed straight through | Source |
|---|---|---|
| Best-in-class AP teams | 51.0% | Ardent Partners, State of ePayables 2025 |
| Average | 35.4% | Ardent Partners, State of ePayables 2025 |
| All other teams | 29.0% | Ardent Partners, State of ePayables 2025 |
| Average (2026 preview) | 38.3% | Ardent Partners, AP Metrics That Matter in 2026 |
| Reason for manual touch | Invoices | Fix |
|---|---|---|
| Price or quantity variance | 310 | Correct PO prices; allow small rounding and freight tolerances |
| No PO number on invoice | 150 | Require PO numbers from top suppliers |
| Capture correction needed | 120 | Move suppliers from paper to PDF or e-invoice |
| Went straight through | 420 | STP rate = 420 ÷ 1,000 = 42% |
Why It Matters
The STP rate is the most direct measure of whether AP automation is working. Each invoice that drops out of the automated path needs someone to investigate it, which adds cost, slows the invoice down and creates room for keying errors. Ardent Partners' State of ePayables 2025 puts the average at 35.4% of invoices, and 51.0% at best-in-class AP teams.
Examples
Measuring STP
Of 1,000 invoices in a month, 420 needed no manual touch, an STP rate of 42%. Of the 580 that did, 310 were price or quantity variances, 150 had no PO number and 120 needed a capture correction. The variances are the biggest group, so tolerances and PO prices are where to start.
Raising STP
A team makes PO numbers mandatory for its 20 largest suppliers. The 150 invoices a month without a PO fall to 40, so 110 fewer invoices need someone to find the right PO. With the same 1,000 invoices, the STP rate rises from 42% to 53%.
Tolerances that are too tight
A 0% price tolerance sends a $2,400.30 invoice against a $2,400.00 PO to a person over a 30-cent rounding difference. Allowing 1% or $25, whichever is lower, lets it pass and still stops a real overcharge on a larger invoice.
Common Mistakes
Counting invoices that were touched after the fact
If someone corrected a field or reassigned a PO at any point, the invoice did not go straight through. Count it from the event history, not from the final status.
Changing the definition between months
Decide whether approval counts as a touch and where the measure stops, then keep it fixed so the trend is real.
Chasing STP by loosening controls
Raising tolerances until everything passes lifts the rate and lets overcharges through. Widen tolerances only for small, explainable differences such as rounding and freight.
Ignoring non-PO invoices
Utilities, rent and subscriptions have no PO. Give them vendor coding defaults and approval rules so they can pass without a person, or report them separately.
Measuring only the total
Track why each invoice dropped out. The breakdown tells you what to fix; the headline rate does not.
In Practice
- Write down what counts as a manual touch and where the measure stops.
- Measure a baseline month: total invoices, invoices with no touch, and the reason for each one that was touched.
- Group the exceptions by cause, such as no PO, price variance, quantity variance, missing receipt, unknown vendor or capture error.
- Fix the largest cause first, for example by requiring PO numbers from top suppliers or recording receipts the day goods arrive.
- Set vendor coding defaults for recurring non-PO bills.
- Review tolerances so rounding and small freight differences pass and real overcharges do not.
- Re-measure monthly and report the rate alongside the exception rate.
Tools and Further Reading
- Touchless invoice processing: The same idea described per invoice.
- Invoice capture: The first step that has to be right for STP.
- Two-way matching: Tolerances that let clean invoices pass.
- Invoice exception rate benchmark: How many invoices need manual exception handling.
- Cost per invoice calculator: What each manual touch costs you.
- Free accounts payable course: Seven self-paced modules covering the AP process, matching, approvals, paying bills, the close and AP metrics.
How Aequo AP Helps
Aequo AP captures invoices from a forwarding inbox or upload, extracts the header and line items with AI, applies vendor coding defaults and suggests GL accounts, and matches invoices to purchase orders and delivery notes within tolerances you set globally or per supplier. Invoices that pass go to the approval rules you define. Invoices that fail become exceptions with a reason, an owner and an SLA, so you can see which causes keep invoices from going straight through.
Start Free TrialFrequently Asked Questions
How do you calculate the STP rate?
Divide the number of invoices processed with no manual touch by the total number of invoices processed in the period, then multiply by 100.
What is a good straight-through processing rate?
Ardent Partners' State of ePayables 2025 puts the average at 35.4%, best-in-class AP teams at 51.0% and all other organizations at 29.0%. Ardent's 2026 figures put the average at 38.3%. Above 50% puts you with the best performers.
How do you improve straight-through processing?
Require PO numbers on invoices, clean up vendor master data, set sensible matching tolerances, record receipts promptly and use invoice capture that reads line items. Then work through the remaining exceptions by cause.
Is straight-through processing the same as touchless processing?
In accounts payable, yes. Both describe invoices that need no human intervention between receipt and approval or posting.
Does STP mean invoices are paid automatically?
No. STP covers capture, matching and coding. Approval and payment release are usually kept as separate controls, and payments often go out in a scheduled payment run.
Can non-PO invoices be processed straight through?
Yes, if the vendor is known and has coding defaults and an approval rule. Without a PO there is nothing to match, so the check is coding and approval rather than matching.
What usually stops invoices going straight through?
Missing or wrong PO numbers, price or quantity variances, missing goods receipts, new or unknown vendors and capture errors on poor scans.
Category
coreReady to automate your AP?
See how Aequo AP can transform your accounts payable process.